What should be paid attention to in the operation specifications of CNC universal spring machine?

About the operating standards of CNC universal spring machine:

① According to the height requirements of CNC spring machine, the corresponding grinding sleeve is equipped. The height of the grinding sleeve should be slightly lower than the height of the spring machine, about 3.0mm, and then adjust the height of the grinding wheel hand wheel operation, lock and fix the position;

② The height of the outlet line plate of the tempering spring machine should be slightly lower than the height of the lower grinding wheel plane;

③ Adjust the speed of the turntable according to the thickness of the spring wire. The larger the diameter, the slower the speed, and vice versa;

④ When starting the spring machine for the first time, be sure to ensure that the cover of the oil filling hole on the turntable speed control servo motor is open to prevent oil leakage caused by air contraction.

Precautions for operation of CNC universal spring machine:

① Do not exceed the load consumption of the spring machine, such as long-term operation, processing beyond the wire diameter range, etc.;

② Pay attention to whether the machine can run smoothly, without noise, abnormal vibration, and stop regular inspection and maintenance;

③ Do not place measuring tools, instruments and fixtures on the machine to avoid unpredictable situations when the machine is running;

④ Ensure that the smooth parts of the machine are smooth and unobstructed, ensure the performance of all aspects of the machine, and extend the running time;

⑤ Machine-specific control points, before starting the computer spring machine, fix the tool position and set screws without loosening, and ensure that the outer diameter of the spring forming is within the required range; Among them, the machine-specific control point is controlled by the computer program Y feed amount to ensure that the spring length is within the required range.