How to ensure the daily high-speed operation of the computer spring machine?

1. When starting the machine, strictly follow the application steps and clarify the operation. All kinds of testing and debugging operations must be stopped before the spring machine leaves the factory. When the user debugs the machine before use, he must check the fasteners to be adjusted to avoid loosening, falling or shifting during use, causing collision. Partial mechanical damage to the spring machine.

2 Try to loosen the wire feed wheel in a long-term shutdown state. Due to the long-term compression of the wire feed wheel of the spring machine, the bearing may be damaged or the wire feed wheel may be slightly deformed, resulting in unstable wire feeding accuracy when powered on later. In addition, if the wire pressing time is too long, the wire diameter may be deformed. When the power is turned on next time, the wire may be stuck or the core rod may be blocked, which may affect the fineness of the firmware.

3 The technician should monitor the technician's debugging process as much as possible. When the apprentice is adjusting the machine, the master should be on site as much as possible to reduce or prevent unnecessary accidents. In addition, after the apprentice has debugged the product, the master must stop checking.

4. During the operation of the machine, stop the working panel of the spring machine. During the operation of the computer spring machine, we prohibit us from touching the spring machine panel with our hands to prevent the operation of the machine parts from causing harm to us.

5 Control the falling direction of the processed product. The idling of the spring machine product must be controlled in a good direction, otherwise it will jam the knife seat and other parts, causing unnecessary collisions or collisions.

6 When trimming the product, be sure to stop the shutdown operation. In the daily work of the CNC spring machine, if the product is found to be abnormal, it must be stopped, and then adjusted and corrected to prevent accidents.

7. When the spring machine fails, please ask professionals to stop maintenance. When the spring machine is damaged or defective, it must be stopped by experienced or professional personnel for inspection and correction; when repairing, relevant professionals should stop repairs. It is strictly forbidden to stop disassembly without professional technicians to avoid secondary damage.